Building near the coast: the details that corrode first
Coastal commercial buildings face salt-laden air, wind-driven rain and high humidity for their whole life. The main structure is usually designed for it. The problems tend to start in small, easily overlooked details.
Exposure varies more than people expect
Corrosion risk depends on distance from the ocean, wind exposure and whether a surface is sheltered from rain that would wash salt away. AS 4312 sets out atmospheric corrosivity zones for Australia, and manufacturers' durability guidance is generally tied to those zones. A product suited to one location may not be suited to another a few kilometres closer to the beach.
Details that tend to corrode first
- Fixings and fasteners that are not rated for the exposure.
- Dissimilar metals in contact, such as stainless steel against galvanised steel, which can cause galvanic corrosion.
- Cut edges and drilled holes in coated steel, where the protective coating has been removed.
- Masonry wall ties and lintels, which sit out of sight inside the wall.
- Sheltered areas such as soffits and under eaves, where salt builds up but is not rinsed by rain.
- Steel embedded in concrete with too little cover.
Why concealed items matter most
A rusting handrail is easy to see and replace. A corroding wall tie or fixing inside a wall is not. Concealed items are the ones most worth getting right at the start, because fixing them later often means opening up finished work.
What can be checked early
- Confirm the site's exposure classification before products are selected.
- Check that fixings, ties and lintels are rated for that exposure.
- Avoid dissimilar metal contact, or separate the metals where it cannot be avoided.
- Treat cut edges and penetrations in coated steel as the manufacturer requires.
- Plan for maintenance, such as washing sheltered surfaces, as part of handover.
On the coast, durability is decided in the details.
This article is general information only. It is not engineering, design, legal or other professional advice, and it does not take into account the requirements of any particular project. Requirements vary between projects and between Queensland, New South Wales and other jurisdictions. Always refer to the project documentation, the relevant codes and standards, manufacturers' tested system details and suitably qualified consultants. Echo Construction Group Pty Ltd accepts no liability for any loss arising from reliance on this information.