Concrete cancer in coastal commercial buildings: what asset owners should look for
"Concrete cancer" is the common name for what happens when the steel reinforcement inside concrete begins to corrode. It is one of the most frequent durability problems in commercial and industrial buildings along the coast, and it is far easier to deal with early than late.
What is happening inside the concrete
Sound concrete protects the steel within it. Over time that protection can break down. Carbon dioxide in the air slowly lowers the alkalinity of the concrete, and salts carried by coastal air or water can work their way in through the surface, through cracks or through joints.
Once moisture and oxygen reach unprotected steel, it rusts. Rust takes up more room than the steel it replaces. That expansion cracks the surrounding concrete from the inside and eventually pushes pieces off, which is known as spalling.
Why coastal buildings are more exposed
Salt-laden air, wind-driven rain and humidity all increase the load on a building's concrete. Buildings close to the ocean, and elements that are regularly wet, tend to show problems sooner. Car parks, balconies, facade edges, exposed slab edges and columns near ground level are common locations.
Early signs to look for
- Rust-coloured staining on concrete surfaces.
- Cracks that follow a straight line, often along the line of the reinforcement.
- Concrete that sounds hollow when tapped.
- Bubbling, flaking or lifting of paint or render.
- Pieces of concrete breaking away, sometimes with steel visible behind.
- Water leaking through slabs, joints or cracks.
Why early action matters
Corrosion does not stop on its own. Each crack lets in more moisture and salt, which speeds up the damage. A repair that is small when first noticed can become a much larger one within a few years.
There is also a safety side. Loose concrete can fall from soffits, balconies and facades. For an asset owner, that is a risk to the people using the building as well as to the structure.
What a proper assessment involves
The cause and the extent of the damage need to be established before any repair is chosen. That is normally done by a structural engineer, who can test the concrete, identify what is driving the corrosion and specify the repair.
Patching the visible damage without dealing with the cause often leads to the same problem returning beside the repair.
Questions for asset owners
- When was the building's concrete last inspected, and by whom?
- Are the areas most exposed to weather and water checked regularly?
- Is there a record of earlier repairs, and have any of them failed?
- Is there an engineer's report to base any repair work on?
Buildings that are inspected routinely tend to have smaller, planned repairs. Buildings that are not tend to find out when something falls.
This article is general information only. It is not engineering, design, legal or other professional advice, and it does not take into account the requirements of any particular project. Requirements vary between projects and between Queensland, New South Wales and other jurisdictions. Always refer to the project documentation, the relevant codes and standards, manufacturers' tested system details and suitably qualified consultants. Echo Construction Group Pty Ltd accepts no liability for any loss arising from reliance on this information.